No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring Alarms

Monitoring Alarms

The eSight provides various alarm monitoring methods and multidimensional alarm data statistics. You can select a proper alarm monitoring method to improve alarm monitoring efficiency.

Table 1 describes the alarm monitoring methods.

Table 5-6 Alarm monitoring methods




Navigation Path

Monitor alarms in the alarm list of the Current Alarms window.

In the Current Alarms window, set filter criteria or search out the alarms that concern you and need to be handled. The alarms that are acknowledged and cleared are automatically moved from the list of current alarms to the list of historical alarms.

Characteristics: All current alarms that occur on all NEs and the eSight are monitored in real time.

You have the operation rights for Browse Current Alarms.

Choose Fault > Current Alarms from the main menu.

Monitoring alarms on the alarm panel

In the upper right corner of the eSight, the alarm panel presents the uncleared and cleared alarm statistics at four severities so that users can comprehensively understand handling status.

Characteristics: The severity-specific statistics on uncleared and cleared alarms are quickly obtained and users can learn the alarm handling progress.


Monitor alarms in the topology view.

You can learn the overall running status of NEs and subnets from their colors that indicate the highest severity of alarms on the NEs and subnets. You can right-click an NE or a subnet and choose Alarm List from the shortcut menu to view current alarms, historical alarms, and masked alarms.

Characteristics: The overall running status of networks is monitored in a graphical and intuitive way and the current alarms, historical alarms, and masked alarms can be queried.

  • A topology view has been set up.
  • You have the operation rights for Browse Current Alarms, Browse Historical Alarms, and Browse Masked Alarms.

Choose Topology > Topology Management from the main menu.

Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 80087

Downloads: 399

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next