No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Service Channel Diagnosis

Service Channel Diagnosis

eSight enables you to diagnose the communication status between the devices of a service channel.

Prerequisites

  • You have logged in to the eSight client.
  • You have been assigned the operation rights.

Procedure

  1. Choose Resource > eLTE > Fault Diagnosis > Service Channel Diagnosis from the main menu.
  2. Click and enter the basic information about service channel.
  3. Click Confirm.
NOTE:

Only DBS3900, eCNS600, and eCNS610 devices are supported.

Follow-up Procedure

You can perform the following operations on the Service Channel Diagnosis page.

Task

Operation

Set parameters

  1. Click .
  2. Enter Diagnosis Parameter, Ping Threshold and Signal Threshold according to the actual needs.
  3. Click Confirm.

Query task

You can perform this operation to query information about service channel diagnosis tasks.

  1. Specify the search criteria, including Channel Name, Device Name, Device IP, and Channel Status.
  2. Click Search. Information about the queried task is displayed.

Delete task

You can perform this operation to delete configuration files information about service channel diagnosis.

  • Delete a single task.
    1. Click in the Operation column of the target task.
    2. Click Yes in the Confirm dialog box.
  • Delete multiple tasks in a batch.
    1. Select the tasks you want to delete.
    2. Click Delete.
    3. Click Yes in the Information dialog box to delete the tasks.

Start task

Click in the Operation row of the target task. The task will start immediately.

Query result

  1. Click in the Operation column of the target task.
  2. The result of the task will display in new page.
Translation
Download
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 72629

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next