No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Maintenance

Data Maintenance

Redhat OpenStack system protocol parameters are changed or system data of eSight and Redhat OpenStack is different due to a restart of eSight, manually adjust the parameter settings or synchronize data to ensure data consistency between eSight and Redhat OpenStack.

Setting Protocol Parameters

If the parameters of communications protocols in the Red Hat OpenStack system are modified, eSight must make the same modifications; otherwise, communication exceptions may occur, causing a failure to monitor the Red Hat OpenStack system.

Procedure

  1. Choose Resource > Virtual Resources from the main menu.
  2. Choose Virtual Resources > Redhat OpenStack in the navigation area on the left.
  3. Click the name of a Redhat OpenStack you want to modify to access its resource manager.
  4. Set protocol parameters.

    Task Name

    Procedure

    Setting HTTPS parameters

    NOTE:

    In the case of incorrect HTTPS parameter settings, RedHat Openstack may get offline.

    1. Choose Settings > Https Protocol Parameters in the navigation area on the left.
    2. Enter the new user name and password.
    3. Click Test to verify the user name and password. If they are incorrect, change them and test again.
    4. Click Apply.

    Setting RabbitMQ parameters

    NOTE:

    The password is used for the connection between eSight and the Rabbit MQ. It should be the same as that configured for the Rabbit MQ.

    Certificates Must be Placed properly according to the operation guide

    1. Choose Settings > RabbitMQ setting in the navigation area on the left.
    2. Modify RabbitMQ parameters.
    3. Click Test to verify the RabbitMQ parameters. If they are incorrect, change them and test again.
    4. Click Apply.

    Setting Sensu parameters

    NOTE:

    Alarms will be trigger based on Json scripts mentioned on parameters setting.

    1. Choose Settings > Sensu Parameters Setting in the navigation area on the left.
    2. Select Alarm based on Alarm ID mentioned
    3. Click Operation option and modify Json message content and relevant parameters.
    4. Click Ok.

Manually Synchronizing Resource Data

If resources change on devices, you can manually synchronize the latest resource information from the devices.

Context

  • The resources of Red Hat OpenStack changes.

Procedure

  1. Choose Resources > Virtual Resources from the main menu.
  2. Choose Virtual Resources > Redhat OpenStack in the navigation area on the left.
  3. Select the devices to be synchronized and choose Synchronize Data > Start Synchronization above the list.

    Figure 11-12 Resource data synchronized successfully

Translation
Download
Updated: 2019-09-12

Document ID: EDOC1100044378

Views: 81901

Downloads: 403

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next