No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00 Operation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Access Scan

Access Scan

When eSight manages IP phones in NAT mode, access scan is not supported. By default, eSight manages IP phones in non-NAT mode. When a great number of eSpace 79 series IP phones with the version V100R001C02 or later, and eSpace 8950 IP phones with all versions connect to the eSight, the eSight uses the access scan function to send auto-configuration server (ACS) addresses and certificate paths to the IP phones. After IP phones automatically update their configurations based on the information received from eSight, the IP phones automatically connect to corresponding terminal groups.

Prerequisites

  • A terminal group has been created
  • IP phones of the correct models and versions are available.

    The access scan function applies to eSpace 79 series IP phones with the version V100R001C02 or later, and eSpace 8950 IP phones with all versions.

  • The value of CPE User Name and CPE Password of the IP Phone has been obtained.

Context

  • Devices that are scanned for may not be IP phones because the eSight cannot distinguish device types from the information sent by the scanned devices during scan access. This results in that the number of scanned devices is different from the number of connected IP phones.
  • If you restart the eSight when an access scan task is running, the task will not continue after the restart. You must manually stop the task and start the task again.

Procedure

  1. Choose Resource > Collaboration Resource from the main menu.
  2. In the navigation tree on the left, choose Terminal Device Management > Resource Management > Terminal Resource and click Access Scan.
  3. Optional: Configure access scan parameters.

    1. Click Config.
    2. Modify CPE User Name and CPE Password based on IP Phone device.
    3. Select a mode to perform access scan for IP phones whose IP addresses are within the specified IP address segment.
      • Immediate scan: indicates that the access scan is performed immediately after the settings are complete. This mode is recommended.
      • Scheduled scan: indicates that the access scan is performed regularly. The options are Periodic, Daily and Weekly.
        • When you select Period(min), you must specify the time when the access scan starts periodically.
        • When you select Daily, you must specify the time when the access scan starts.
        • When you select Weekly, you must specify the time and day in a week when the access scan starts.
      • If you select both Immediate scan and Scheduled scan, the access scan is performed immediately and then regularly as scheduled.

  4. Configure scan parameters.

    1. Click Add in Scan Parameter.
    2. Click Add, select terminal group, and click OK.
      NOTE:

      When you select a terminal group, only the IP address segment group is displayed.

    3. Click Next, set Port and click OK.
      NOTE:

      Currently, the eSpace 79-series and eSpace-89 series IP phones support only port 8080.

      To modify a segment to scan, click next to the segment. In the displayed dialog box, set Start IP, End IP, and Port for the IP phones to scan, and click OK.

  5. Select the network segment to be scanned and click Start.

    The eSight starts the access scan to send ACS addresses and certificate paths to IP phones. After IP phones automatically update their configurations based on the information received from eSight, the IP phones automatically connect to corresponding terminal groups.

Result

Scan results are displayed in Scan Records.

  • To view scan result details about a record, click in the record. The scan result details include the start time, end time, time spent, total number of devices scanned, total number of IP phones detected, and number of devices failed to be scanned.
  • To search for required scan records, select a search type from the Search Type drop-down list box and enter appropriate search criteria.
Translation
Download
Updated: 2019-06-30

Document ID: EDOC1100044378

Views: 59669

Downloads: 272

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next