No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R010C00SPC200, 300, and 500 Self-Service Integration Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Configure a Private Key in Push Mode

How Do I Configure a Private Key in Push Mode

Question

When I upload performance and resource files in push mode, how do I configure public keys to apply SFTP public key authentication?

Answer

In push mode, the NBI module serves as a client, needs to obtain a private key file, and configures the private key path and password in the nbi.xml file.

  1. Generate a key pair.A public key and a private key compose a key pair. The public key is configured on the server and the private key is configured on the client.

    Use the PuTTYGen tool to generate a key pair. Click Generate to generate a public key. Copy the generated public key, name it the SFTP user name, and save the file without the file name extension.

    Click Save private key to generate a private key. If a password is required, set Key passphrase to a private key password and confirm the password.

    The generated private and public keys are shown in the following figure.

  2. Configure a private key.

    In push mode, a private key is required in the NBI module. The private key file is saved in eSight installation directory/AppBase. This directory stores the private key file in OpenSSH file format, but not in PPK format. In the nbi.xml file, set AuthMode to 1 (key authentication).If a private key password has been set, you need to add the <ValuePhrase></ValuePhrase> node to configure the ciphertext password of the private key.

  3. Restart the eSight.
Translation
Download
Updated: 2019-10-30

Document ID: EDOC1100044386

Views: 15425

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next