No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R010C00SPC200, 300, and 500 Self-Service Integration Guide 11

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


You can set parameters of the SNMP NBI by modifying the configuration file of the SNMP NBI. In this way, eSight can connect to the upper-layer NMS.

The path of the configuration file of the SNMP NBI is eSight installation path/AppBase/etc/nbi/snmp/snmpagent.xml.

After the configuration file, restart the network management service to make the configuration take effect.

Updated: 2019-12-13

Document ID: EDOC1100044386

Views: 20905

Downloads: 90

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next