Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparation
This section describes how to adjust the configuration on eSight before a third-party system uses an open API interface to integrate eSight data. It is recommended that Huawei support engineers refer to the this document to determine information about the third-party system and modify the configuration file.
In this version, the configuration file is directly modified to adjust inter-system integration parameters. Save the modified configuration file and restart the eSight server.
Figure 3-5 Preparations
![]()
- Configure Digital Certificates
- Modify the Configuration File
- Configure IP white list
You can configure an IP address whitelist in either of the following ways. - Pre-configuring the Default System Integration User
- Set User Permissions
This section describes how to set user permissions for Open APIs. - Preparing for Web Message Notification
- Invoking Open APIs Based on the HttpClient
- Verify Open APIs Using Restclient (only for openid Based Authentication)
You can use the third-party tool Restclient to verify open APIs.
Previous
