Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Northbound FTP Interface (NTA)
This section describes how to configure the NTA northbound FTP interface, generate NTA northbound files, interconnect with a third-party system, and verify the configuration of the northbound FTP interface.
- Configuration Procedure
This section describes how to configure the eSight northbound FTP interface of Network Traffic Analyzer (NTA). - Configuring the Generation of NTA Northbound Files
A third-party system user needs to configure the generation of original flow files of the network traffic analyzer (NTA) component before the system startup and set the storage duration and clearing period of the files to 1 hour and 3 minutes, respectively. - Configuring the Interconnection with the third-party system (pull)
In the nbi.xml file, configure the interconnection between eSight and the third-party system in pull mode to enable the third-party system to log in to the eSight FTP server using an FTP client to download NTA northbound files. - Verifying Configurations
This section describes how to check whether the northbound FTP interface is configured successfully.
Previous
