Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Use the Upgrade Check Tool
Question
How do I use the upgrade check tool?
Answer
- Windows
- Log in to the server as the Administrator user. On the eSight console, choose Tools > Upgrade Check Tool.
The upgrade check tool GUI is displayed.
- Click Check.
- Log in to the server as the Administrator user. On the eSight console, choose Tools > Upgrade Check Tool.
- Linux
- In an HA system, you need to use the tool on the active server.
- Log in to the server as the ossuser user.
- Start the upgrade check tool.
- Configuration through a graphical tool (applicable only to the SUSE Linux operating system)
- Run the following commands to start the upgrade check tool:
cd eSight installation directory\mttools\tools
sh upgradechecktool.sh
The upgrade check tool GUI is displayed.
- Click Check.
- Run the following commands to start the upgrade check tool:
- Configuration through commands (applicable to the EulerOS and SUSE Linux operating systems)
es_cli -cmd upgradecheck
The es_cli -cmd upgradecheck command can be used in eSight V300R010C00SPC500 and later versions.
- Configuration through a graphical tool (applicable only to the SUSE Linux operating system)
