No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

TE10 and TE20 Videoconferencing Endpoint V600R019C00

This document describes the commands applicable to the HUAWEI TE10 and TE20 Videoconferencing Endpoint (endpoint).
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the commands applicable to the HUAWEI TE10/TE20 Videoconferencing Endpoint (endpoint).

Intended Audience

This document is primarily intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

04

2019-06-10

This is the fourth official release.

  • Added 3.1.15 mc cfg SharpVidFormat
  • Added 3.1.15 mc cfg CommCapSrtpkey
  • Added 3.1.15 mc cfg H323dns
  • Added 3.2.90 mnt setFullFormatAuxCap

03

2019-02-28

This is the third official release.

  • Added 3.1.84 mc VideoDecOutputMode
  • Added 3.2.75 mnt CmdCustom
  • Added 3.2.76 mnt SetSinLowThrd
  • Added 3.2.77 mnt MaecNlpThdUsb
  • Added 3.2.78 mnt EnableAORcvGain
  • Added 3.2.79 mnt MaecUpdateThrd
  • Added 3.2.80 mnt MaecRes2UpFace
  • Added 3.2.81 mnt MaecRes1UpFace
  • Added 3.2.82 mnt MaecResMakeRate
  • Added 3.2.83 mnt MaecResFactor
  • Added 3.2.84 mnt MaecBlock
  • Added 3.2.85 mnt RcvGain
  • Added 3.2.86 mnt MaecNlp
  • Added 3.2.87 mnt AudioStep
  • Added 3.2.88 mnt AudioInputGainOffset
  • Added 3.2.89 mnt SetCompoundsli

02

2018-12-07

This is the second official release.

  • Added 2.1.169 audio SetHdmiOutMode
  • Added 2.1.170 audio SetHdmiAuxFollow
  • Added 2.1.171 audio EnableHdmiAuxSend
  • Added 2.1.172 audio SetMicDevice
  • Added 2.1.173 audio SetSoundDevice
  • Added 3.2.50 mnt setAudioMode
  • Added 3.2.72 mnt hdmi2record
  • Added 3.2.73 mnt EnableLastLayout
  • Added 3.2.74 mnt AudioPacketDrv

01

2018-09-30

This issue is the first official release.

Translation
Download
Updated: 2019-06-15

Document ID: EDOC1100044516

Views: 113430

Downloads: 32

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next