No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

TE10 and TE20 Videoconferencing Endpoint V600R019C00

The ever expanding network and increasing network devices present a major challenge in effectively managing networks and providing high-quality network services. Network management is vital to the proper functionality of a network solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MIB Loading

MIB Loading

When MIB files are loaded, the MIB files that need to be imported must be loaded first.

MIB files can be loaded individually or in batches. The following takes MG-SOFT MIB Browser as an example to describe MIB file loading.

Loading a Single MIB File

  1. Open MG-SOFT MIB Browser. In the MG-SOFT MIB Browser window that is displayed, click the Run MG-SOFT MIB Compiler icon, as shown in Figure 1-4.

    Figure 1-4 MG-SOFT MIB Browser window

  2. In the MG-SOFT MIB Compiler window that is displayed, click Compile MIB file, as shown in Figure 1-5.

    Figure 1-5 MIB loading window

  3. Select the MIB file to be loaded, as shown in Figure 1-6.

    Figure 1-6 Selecting the MIB file to be loaded

  4. Load the MIB file.

    Click Open to load the selected file. The following information is displayed after the MIB is loaded, as shown in Figure 1-7

    Figure 1-7 Information indicating that the MIB file is loaded successfully

  5. Save the MIB file that is loaded successfully. The MIB file is saved to the default path, as shown in Figure 1-8.

    Figure 1-8 Saving the MIB file

Loading MIB Files in Batches

  1. Open MG-SOFT MIB Browser. In the MG-SOFT MIB Browser window that is displayed, click the Run MG-SOFT MIB Compiler icon, as shown in Figure 1-9.

    Figure 1-9 MG-SOFT MIB Browser window

  2. In the MG-SOFT MIB Compiler window that is displayed, click Compile multiple MIB files, as shown in Figure 1-10.

    Figure 1-10 Compile multiple MIB files

  3. Select MIB files to be loaded, as shown in Figure 1-11.

    Figure 1-11 Selecting MIB files to be loaded

  4. Load the MIB files.

    Select the folder where the MIB files to be loaded are stored and click OK.

    The MIB files are loaded in batches.

  5. Save the MIB files that are loaded successfully. The MIB files are saved to the default path.
Translation
Download
Updated: 2019-03-08

Document ID: EDOC1100044518

Views: 10257

Downloads: 22

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next