No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE20 Videoconferencing Endpoint V600R019C00

Describes how to maintain and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an FTPS Server

Configuring an FTPS Server

FTPS is an extension of the commonly used FTP to support the SSL. The FTPS server ensures the security of the endpoint network address book.

NOTE:

To configure the network address book after the FTPS client is configured, see the TE20 Videoconferencing Endpoint V600R019C00 Web Online Help.

Following uses the FileZilla server as an example to describe how to configure an FTPS server.

  1. Set the IP address of the computer on which the FTPS server (for example, FileZilla server) is to be installed. Ensure that the IP addresses of the computer and endpoint are in the same network segment.
  2. Run the FTPS server installer (for example, FileZilla_Server-0_9_41.exe) to install the FTPS server on the computer.
  3. Double-click to run the FTPS server. Click OK in the displayed dialog box, as shown in Figure 3-3.

    Figure 3-3 Connect to Server dialog box

  4. Choose Edit > Settings.
  5. Click SSL/TLS settings in the left column and select Enable FTP over SSL/TLS support (FTPS), click Browse to import the certificate, and click OK, as shown in Figure 3-4.

    NOTE:
    • Before importing a certificate, make sure it is issued by a security authority to prevent security risks.
    • If no certificate is available, click Generate new certificate.
    Figure 3-4 FTPS Server Options dialog box

  6. Choose Edit > Users. The Users dialog box is displayed, as shown in Figure 3-5.

    Figure 3-5 Adding a user

  7. Click Add to add a user. Select Enable account and Password and enter the Password.
  8. Click Shared folders under Page, then click Add, and set the path for the user root directory of FTPS server, as shown in Figure 3-6.

    Figure 3-6 Specifying the path for the user root directory of FTPS server

  9. Click OK.
Translation
Download
Updated: 2019-06-15

Document ID: EDOC1100044520

Views: 12544

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next