No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE20 Videoconferencing Endpoint V600R019C00

Describes how to maintain and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network

Network

Table 4-6 lists the troubleshooting methods for problems that may arise on the network.

Table 4-6 Methods for troubleshooting common network problems

Problem

Possible Cause

Solution

When you attempt to use Telnet to access the endpoint, a message is displayed to indicate that the number of connections to the endpoint has reached the limit.

The number of connections to the endpoint has reached the maximum value.

NOTE:
  • A maximum of three SSH and Telnet connections to the endpoint is allowed.
  • A maximum of three SSH connections to the endpoint is allowed.

Disconnect some Telnet connections.

NOTE:

By default, the Telnet service is disabled. The Telnet service is generally used to query system status and logs and perform specific maintenance. Exercise caution when enabling this service.

Translation
Download
Updated: 2019-06-15

Document ID: EDOC1100044520

Views: 12665

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next