No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE20 Videoconferencing Endpoint V600R019C00

Describes how to maintain and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Fault Diagnosis Model

Fault Diagnosis Model

Figure 4-1 shows the diagnosis model for your endpoint.

Figure 4-1 Diagnosis model

According to Figure 4-1, diagnosis functions diagnose the audio module, video module, and network module.

Audio signals are transmitted in the following paths:

  • Local microphone → 1 → 5 → Communications network → 6 → 7 → Remote speaker
  • Local speaker ← 2 ← 5 ← Communications network ← 6 ← 8 ← Remote microphone

Video signals are transmitted in the following paths:

  • Local camera → 3 → 5 → Communications network → 6 → 9 → Remote monitor
  • Local display ← 4 ← 5 ← Communications network ← 6 ← 10 ← Remote camera
Translation
Download
Updated: 2019-06-15

Document ID: EDOC1100044520

Views: 12412

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next