Setting the SIP Parameters

Register with server

Enable

Specifies whether to register with the SIP server. Confirm this with the administrator. If the SIP server is used, set the parameters listed in this table.

Server address

-

Example: 192.168.1.15

Conference service number

-

Obtain the value from the administrator.

Proxy server

Disable

Specifies whether to use the proxy server. Confirm this with the administrator.

Proxy server address

-

If Proxy server is set to Enable, contact the administrator to obtain the proxy server address. The Proxy server address and Standby proxy server address fields cannot be left empty at the same time.

If two proxy servers are deployed in active/standby mode, once the active proxy server is faulty, the endpoint will switch to the standby proxy server for registration.

Standby proxy server address

-

Site number

-

Example: 07556999

User name

-

Example: admin

Password

-

Example: Change_Me

Server type

Standard

Recommended value.

Transmission type

Auto

If Auto, TCP, or UDP is selected, the system will prompt you that this option has a security risk. To improve communication security, select TLS.

SSL version

TLS 1.2

Default value. Confirm the SSL version with the administrator.

TLS verification

Enable

Default value. Confirm with the administrator whether to enable TLS verification.

BFCP transmission type

Auto

If Auto, TCP, or UDP is selected, the system will prompt you that this option has a security risk. To improve communication security, select TLS.

Huawei BFCP

Disable

Default value.

• Enable: When the endpoint interworks with a Huawei device, TLS is preferentially used for BFCP transmission.
• Disable: When the endpoint interworks with a remote site, UDP is preferentially used for BFCP transmission.

BFCP SSL version

TLS 1.2

Default value. Confirm the BFCP SSL version with the administrator.

Video request handling

Manual

Default value. Confirm the video request handling method with the administrator.

Session keep-alive

Disable

Default value.

If this function is enabled, the endpoint negotiates with the peer end whether the session keep-alive function is required. If yes, the endpoint periodically sends a session keep-alive message to the peer end.