Remote Control Settings
This section describes how to pair a remote control with an endpoint. The remote control can be the one that comes with the endpoint or a new one that you prepare separately.
Pairing a Remote Control
When an endpoint is powered on for the first time, the remote control pairing screen will appear by default. If you want to pair the remote control with the endpoint, perform as follows:
Stand within 1 m (3.28 ft) away from the endpoint and press and hold 
If the message "The pairing succeeded." is displayed, the endpoint and remote control are paired successfully.
Unpairing a Remote Control
To unpair a remote control from an endpoint, press and hold 
Replacing a Remote Control
If you want to use a new remote control for an endpoint, pair them first.
After they are paired, the pairing information of the old remote control is automatically deleted.
Stand within 1 m (3.28 ft) away from the endpoint and press and hold 
If the message "The pairing succeeded." is displayed, the endpoint and remote control are paired successfully.