Connecting to an Endpoint

AirPresence Client on a PC

On the desktop of the PC that has the AirPresence client installed, double-click to start the AirPresence client, as shown in Figure 5-3.

Figure 5-3 Main window

• To connect to the TE10, obtain the projection code from the TE10 user interface, enter the projection code in the text box in the main window of the AirPresence PC client, and click . This connection method is available only when Connection policy is set to Projection code under System Settings > Security > AirPresence of the TE10 web interface.
• When Connection policy is set to IP+password under System Settings > Security > AirPresence of the TE10 web interface, perform as follows to connect to the TE10:
  • Enter the IP address of the TE10 to connect in the text box in the main window of the AirPresence PC client and click . The Connect Device dialog box shown in Figure 5-4 is displayed.
  • Click Start Search. In the found endpoints, click next to the TE10 to connect. The Connect Device dialog box shown in Figure 5-4 is displayed.
    Figure 5-4 Connecting to an endpoint
    
    Enter the password and click Connect.

    • The default password is Change_Me.
    • Or you can directly select Yes on the TE10 user interface to accept the connection request.

AirPresence Client on a Mobile Device

1. On the screen of the mobile device that has the AirPresence client installed, tap to start the AirPresence client, as shown in Figure 5-5.
   Figure 5-5 Home screen
   

2. In the text box, enter the projection code you have obtained from the TE10 user interface to connect. Alternatively, tap to scan the QR code on the TE10 user interface.

   The screen shown in Figure 5-6 will be displayed if the connection is successful.

   Figure 5-6 Connecting to an endpoint