Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the SIP Parameters
- On the user interface, choose System Settings > Registration > Manual configuration > SIP and set the SIP parameters, as shown in Figure 2-14.
Confirm with your administrator whether the SIP server is required. If yes, set the SIP parameters listed in Table 2-5.
Table 2-5 describes the SIP parameters.Table 2-5 SIP parametersParameter
Value
Remarks
Server address
-
Example: 192.168.54.4
Proxy server address
-
If you set Server address to the SIP server domain name, set this parameter to the IP address bound to that domain name.
URI
-
Example: 07555646156
User name
-
Example: admin
Password
-
Example: Change_Me
Transmission type
Auto
Default value.
If Auto, TCP, or UDP is selected, the system will prompt you that this option has a security risk. To improve communication security, select TLS.
- Select the OK button and press OK on the remote control.
