Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Performing Networking Authentication
If your endpoint is located on a wide area network (WAN), and the network needs to be authenticated, perform the following steps:
- On the user interface, choose System Settings > Network > Network Authentication to access the screen shown in Figure 2-13 and press OK.
- On the authentication screen that is displayed, enter necessary authentication information.
You can obtain the authentication information from the network administrator.
