Setting the General Parameters
- On the user interface, choose System Settings > More > General and set the general parameters, as shown in Figure 2-16.
Table 2-7 describes the general parameters.
Table 2-7 General parametersParameter
Value
Remarks
AirPresence password validity
10 min
- The default value is 10 min when Connection policy is set to Projection code under System Settings > Security > AirPresence of the TE10 web interface.
- The default value is 8 hours when Connection policy is set to IP+password under System Settings > Security > AirPresence of the TE10 web interface.
Image mode
Standard
Default value.
Custom call settings
Auto
Default value.
Projection code policy
Auto
This connection method is available only when Connection policy is set to Projection code under System Settings > Security > AirPresence of the TE10 web interface.
Time zone
(UTC+08:00) Beijing, Chongqing, Hong Kong, Urumqi
Default value.
Language
English
Default value.
To change the language, select the Language field and press OK. Then the desired language from the drop-down list box.
Video surveillance
Enable
After the Monitor video function is enabled, you can monitor, take, and save pictures of the video and presentation of local and remote sites on the endpoint web interface.
This function involves personal privacy. Ensure that its use complies with local laws and regulations.
Web login
Enable
- Enable: All computers on the same network segment as the endpoint can access the web interface of the endpoint.
- Via Wi-Fi only: Only the computer that connects to the Wi-Fi hotspot on the endpoint can access the web interface of the endpoint.
- Disable: The web interface of the endpoint is inaccessible.
- Select Save to save the parameter settings.
