Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the LAN Parameters
- On the user interface, choose System Settings > Network > LAN and set the LAN parameters, as shown in Figure 2-10.
Table 2-3 describes the Connection type parameter.Table 2-3 Setting the LAN parameters
Parameter
Value
Remarks
Connection type
Static
The options are as follows:
- Static: If you select Static, you need to set IP address, Subnet mask, Gateway address, and DNS address.
- DHCP: If you select Dynamic, the TE10 automatically obtains an IP address from the DHCP server.
Obtain the value from the administrator.
- Select Save and press OK.
