No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE10 Videoconferencing Endpoint V600R019C00

Describes how to maintain and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Understanding the Simulated Remote Control

Understanding the Simulated Remote Control

You can invoke the simulated remote control on the web interface and click on it to remotely control your endpoint. The simulated remote control has all the functions provided by the physical remote control delivered with the TE10.

On the web interface, choose Device Control > Use Remote Control to invoke the simulated remote control show in Figure 1-6.


The buttons on the simulated remote control and their functions are described in TE10 Videoconferencing Endpoint V600R019C00 Operation Guide.

Figure 1-6 Simulated remote control
Updated: 2019-06-15

Document ID: EDOC1100044668

Views: 14843

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next