No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE10 Videoconferencing Endpoint V600R019C00

Describes how to maintain and troubleshoot the Videoconferencing Endpoint.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Conference Control

Conference Control

Table 4-10 lists the troubleshooting methods for common problems you may encounter during conference control.

Table 4-10 Methods for troubleshooting conference control problems


Possible Cause


While the endpoint is in use during a conference, you cannot view the desired site.

A site in the conference is being broadcast, and all the sites must view that site except the chair site and broadcast site.

Ask the chair site to stop site broadcast.

No video is sent from the site you want to view.

Ask the related site administrator to troubleshoot the site video.

The View Site function is restricted on the RM or the SMC2.0.

Contact the enterprise administrator to resolve this problem.

Updated: 2019-12-02

Document ID: EDOC1100044668

Views: 18026

Downloads: 18

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next