No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE10 Videoconferencing Endpoint V600R019C00

Describes how to maintain and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing Certificates

Managing Certificates

You can import server and CA certificates into your endpoint on the web interface. These certificates can be used to identify users, certificate authorities, and servers to improve communication security. For example, if an endpoint needs to register with a SIP server using the Transport Layer Security (TLS) protocol or encrypts BFCP signaling over TLS, it must have a server certificate loaded first.

Before importing a certificate, make sure it is issued by a security authority to prevent security risks.

  • Server Certificate: You have obtained the required certificate from the SIP server administrator or downloaded it from a certificate authority.
  • CA Certificate: You have downloaded the required certificate from a certificate authority.
  1. Choose Maintenance > Certificate Management.

    The Certificate Management page is displayed.

  2. Choose the Server Certificate or CA Certificate tab, and click Add Certificate.

    The Import Certificate dialog box is displayed.

  3. Click Select File to select the certificate you want to import.
  4. Select the desired certificate type.

    Only the certificate in .pem format can be imported.

  5. Click Import.
  6. Click Return when OK is displayed.

    After adding a certificate, you can delete it or view its details. For a server certificate, you can also enable or disable the HTTPS, SIP, and 802.1X services for it.

Updated: 2019-12-02

Document ID: EDOC1100044668

Views: 15816

Downloads: 17

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next