No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE10 Videoconferencing Endpoint V600R019C00

Describes how to maintain and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Icons on the User Interface

Icons on the User Interface

The icons provided on the user interface indicate the status and settings of the system, helping you quickly understand system status and complete tasks.

Table A-1 lists concerned icons that display the connection status in the upper right corner of the user interface. Before initiating a conference, check the status of these icons.

Table A-1 Network status icons

Icon

Name

Indicates...

Network disconnection

The endpoint is disconnected from an IP network. The network cable may be disconnected.

Wi-Fi connection status

The first icon indicates that the Wi-Fi network has disconnected after the Wi-Fi client is enabled.

The other icon indicates the signal status of a connected Wi-Fi network.

Remote control battery status

The battery of the remote control is insufficient.

Bluetooth device connection status

The endpoint is connected with a Bluetooth device.

When you view a video, the icons listed in Table A-2 are used to indicate the status of certain operations. During a conference, pay attention to the status of these icons to ensure that the relevant operations are performed correctly.

Table A-2 Operating status icons

Icon

Name

Indicates…

Microphone muting status

The microphone of the local site is muted.

Speaker muting status

The speaker of the local site is muted.

Encrypted conference

The current conference is an encrypted conference (with media streams encrypted).

Chair

The local site is the chair site.

Presentation sharing on the local site

The local site is sharing a presentation.

Presentation sharing on a remote site

A remote site is sharing a presentation.

Local site broadcast

The local site is being broadcast in the current conference.

Do Not Disturb

The Do Not Disturb function is enabled at the local site.

Remote site muting

A remote site is muted, and cannot be heard by the local site.

Poor network condition

Network impairments or packet loss occurs in the network where the endpoint is located see the TE10 Videoconferencing Endpoint V600R019C00 Web Online Help.

Video monitoring

A user is remotely monitoring or taking pictures of the site through its web interface.

Local video recording

A local conference is being recorded.

Translation
Download
Updated: 2019-12-02

Document ID: EDOC1100044668

Views: 16092

Downloads: 17

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next