No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE10 Videoconferencing Endpoint V600R019C00

Describes how to maintain and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Performing Intelligent Diagnostics

Performing Intelligent Diagnostics

On the user interface of the endpoint, you can use the Diagnose function to check the endpoint status (covering hardware, network, audio, and video). From the check results, you can clearly know whether the endpoint is running properly.

Perform device diagnostics on the user interface as follows:

On the System Settings screen, press on the remote control to access the screen shown in Figure 2-3. After the diagnostics is complete, the screen shown in Figure 2-4 will be displayed.

  • The diagnostic items (for example, those shown in Figure 2-3 and Figure 2-4) depend on system settings.
  • You can click Cancel to cancel a diagnostic task or click Again to perform the task again.
Figure 2-3 Diagnostics in progress
Figure 2-4 Diagnostics completed
Updated: 2019-12-02

Document ID: EDOC1100044668

Views: 16048

Downloads: 17

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next