No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE10 Videoconferencing Endpoint V600R019C00

Describes how to maintain and troubleshoot the Videoconferencing Endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Cleanliness

Checking the Cleanliness

To ensure that your endpoint runs properly, check its cleanliness regularly.


If the endpoint runs for a long period of time but is not cleaned, its body, ports, heating vents, and camera lens may be covered with dust. Its performance may be compromised, impacting user experience. Therefore, it is necessary to regularly clean the endpoint and its peripherals, helping extend their lifecycle and improve user experience.

Checking the Endpoint Cleanliness

Check the cleanliness of your endpoint regularly to ensure that it runs properly in a long term and delivers superb conference experience.

Table 2-4 describes the items to be checked. If any of them does not meet the requirement, clean it accordingly.

Table 2-4 Cleanliness items



Embedded camera lens

The camera lens is clean.

Ports and heating vents

The ports and heating vents are clean.

Device body

The device body is clean.

Updated: 2019-06-15

Document ID: EDOC1100044668

Views: 14753

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next