No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web Online Help

TE10 Videoconferencing Endpoint V600R019C00

This document describes the help information on the web interface.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the HTTP Proxy Parameters

Setting the HTTP Proxy Parameters

If the HTTP proxy is required, configure it by following the instructions in this section.

Procedure

  1. Choose System Settings > Network and click the HTTP Proxy tab.
  2. Set the HTTP proxy parameters, as described in Table 3-20.

    Table 3-20  HTTP proxy parameters

    Parameter

    Description

    Setting

    Proxy server address

    Specifies the IP address of the HTTP proxy.

    No default value is set for this parameter.

    User name

    Password

    Specifies the user name and password for authenticating the HTTP proxy.

    No default value is set for this parameter.

    Port

    Specifies the port used by the endpoint to interact with the HTTP proxy.

    The default value is 8080.

  3. Click Save to make the settings take effect.
Translation
Download
Updated: 2019-10-22

Document ID: EDOC1100044672

Views: 13947

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next