No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web Online Help

TE10 Videoconferencing Endpoint V600R019C00

This document describes the help information on the web interface.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Initiating a Conference from the Predefined Conference Page

Initiating a Conference from the Predefined Conference Page

On your endpoint, you can create a conference on the predefined conference page and initiate it from this page.

Prerequisites

Before initiating a conference, define the participant sites and register your endpoint with the GK server and SIP server.

Procedure

  1. Choose Conference > Start Conference and click the Predefined Conferences tab.
  2. Click Create Conference and perform either of the following:
    • Click Address Book. On the displayed tab, select the desired sites.
    • Click LDAP Address Book. On the displayed tab, search for and select the desired sites.
  3. Click .
    The selected sites are added to the site list on the right.
  4. Set the conference parameters.
    • To create an SIP multipoint conference, set the advanced parameters listed in Table 4-2.
      Table 4-2  Conference parameters

      Parameter

      Description

      Setting

      Conference Name

      Specifies the name of the conference.

      -

      Other parameters

      Specifies the mode for setting conference parameters.

      • Auto-sensing: Your endpoint sets conference parameters to be the same as the parameter settings described in Specifying Conference Settings.
      • User Defined: You must manually set Conference control password, Anonymous SIP sites, and SRTP encryption.

      The default value is Auto-sensing.

      Conference control password

      Specifies the password to the conference.

      This password is required for:
      • The site that wants to chair the conference to obtain the chair control rights.
      • Anonymous sites to join the conference for authentication. For details about how to use the password to join an authentication conference, see Performing Two-Stage Dialing.

      Enter a value that contains 1 to 6 digits.

      Anonymous SIP sites

      Specifies the number of anonymous SIP sites that are allowed to join the conference. Anonymous sites are the sites without defined numbers.

      For example, to allow five anonymous SIP sites to join the conference, set this parameter to 5. If this parameter is set to 0, anonymous sites are not allowed to join the conference.

      The default value is 0.

      H.235 conference

      Specifies the conference security type.

      • Auto: The endpoint negotiates with the peer end to determine whether to hold an encrypted conference.
      • Forced: The endpoint can hold only encrypted conferences. To improve communication security, select this option.

      The default value is Enable.

      To enhance the communication security on your endpoint, select Enable.

      NOTE:
      If you select Forced, confirm that Encryption is set to Auto or Forced on your endpoint and the endpoints to call. Otherwise, the calls will fail.

      Support recording

      Specifies whether to enable the recording function for the multipoint conference. After this function is enabled, the conference can be recorded, and the recorded video can be played from the recording server.

      This parameter is not selected by default.

      Support live broadcast

      Specifies whether to enable the live broadcast function for the multipoint conference. After this function is enabled, the recording server allows you to watch live broadcast of the ongoing conference.

      This parameter is not selected by default.

    • To create a H.323 multipoint conference, set the advanced parameters listed in Table 4-3.
      Table 4-3  Conference parameters

      Parameter

      Description

      Setting

      Conference Name

      Specifies the name of the conference.

      -

      Rate

      Specifies the data transmission rate for the conference.

      To help ensure conference quality, set this parameter to 1920 kbps or a larger value.

      Continuous presence

      Specifies the maximum number of site videos that can be viewed simultaneously during the conference. When continuous presence is broadcast, the sites in the conference can view the videos of multiple sites simultaneously.

      If you select None, the conference does not support continuous presence.

      The default value is None.

      Other parameters

      Specifies the mode for setting conference parameters.

      • Auto-sensing: Your endpoint sets conference parameters to be the same as the parameter settings described in Specifying Conference Settings.
      • User Defined: You must manually set Conference control password, Anonymous H.323 sites, Anonymous PSTN sites, H.235 conference, and Paying site.

      The default value is Auto-sensing.

      Conference control password

      Specifies the password to the conference.

      This password is required for:
      • The site that wants to chair the conference to obtain the chair control rights.
      • Anonymous sites to join the conference for authentication. For details about how to use the password to join an authentication conference, see Performing Two-Stage Dialing.

      Enter a value that contains 1 to 6 digits.

      Anonymous H.323 sites

      Specifies the number of anonymous H.323 sites that are allowed to join the conference.

      For example, to allow five anonymous H.323 sites to join the conference, set this parameter to 5. If this parameter is set to 0, anonymous sites are not allowed to join the conference.

      The default value is 0.

      Anonymous PSTN sites

      Specifies the number of anonymous PSTN sites that are allowed to join the conference.

      For example, to allow five anonymous PSTN sites to join the conference, set this parameter to 5. If this parameter is set to 0, anonymous sites are not allowed to join the conference.

      The default value is 0.

      H.235 conference

      Specifies the conference security type.

      • Auto: The endpoint negotiates with the peer end to determine whether to hold an encrypted conference.
      • Forced: The endpoint can hold only encrypted conferences. To improve communication security, select this option.

      The default value is Enable.

      To enhance the communication security on your endpoint, select Enable.

      NOTE:
      If you select Forced, confirm that Encryption is set to Auto or Forced on your endpoint and the endpoints to call. Otherwise, the calls will fail.

      Paying site

      Specifies the party that will be charged for the conference.
      • Local site: The local site pays for the conference.
      • Another site: Another site pays for the conference. If you select this option, you must fill in Paying account and Paying password.

      The default value is Local site.

      Support recording

      Specifies whether to enable the recording function for the multipoint conference. After this function is enabled, the conference can be recorded, and the recorded video can be played from the recording server.

      This parameter is not selected by default.

      Support live broadcast

      Specifies whether to enable the live broadcast function for the multipoint conference. After this function is enabled, the recording server allows you to watch live broadcast of the ongoing conference.

      This parameter is not selected by default.

  5. Click Hold Conference.

    The conference is initiated according to the parameters you set.

Translation
Download
Updated: 2019-12-02

Document ID: EDOC1100044672

Views: 16260

Downloads: 19

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next