No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web Online Help

TE10 Videoconferencing Endpoint V600R019C00

This document describes the help information on the web interface.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Address Book Parameters

Setting Address Book Parameters

With correct address book settings on your endpoint, you can download site information from the File Transfer Protocol (FTP) network and the Lightweight Directory Access Protocol (LDAP) address book to your endpoint.

Background

The address book stores address information of the sites in a videoconferencing system. You can use any of the following methods to find the site you want to call:
  • Download the FTP network address book from a File Transfer Protocol over SSL (FTPS) server to the local address book. Then search the local address book for the site.
  • Search for the site on the LDAP server.
NOTE:
  • The LDAP server stores site information. The endpoint can access the LDAP server using the LDAP.

  • If the corporate directory settings have been defined on the SMC and your endpoint has successfully registered with the GK or SIP server, the SMC will automatically deliver the corporate directory settings to your endpoint. Then you can search for the site you want to call from the corporate directory.

Procedure

  1. Choose System Settings > Network and click the Address Book tab.
  2. Set the address book parameters listed in Table 3-16.

    Table 3-16  Address book parameters

    Parameter

    Description

    Setting

    FTP Address Book

    Enable network address book

    Specifies whether to enable the FTP network address book. If you set this parameter to Enable, you must also set the rest of the parameters described in this table.

    The default value is Disable.

    FTPS

    Specifies whether to use File Transfer Protocol over SSL (FTPS) to encrypt data through the Secure Sockets Layer (SSL) and ensure data integrity.

    The default value is Enable.

    Mode

    Specifies the mode for FTP network address book download.

    The default value is Passive.

    This is a fixed value.

    Synchronize automatically

    Specifies whether your endpoint automatically downloads records from the FTP network address book to the local address book.

    The default value is Disable.

    Local records prevail if duplicates exist

    Specifies whether records that already exist in the local address book remain unchanged during an address update from the FTP network address book.

    The default value is Disable.

    Prompt users during update

    Specifies whether a message is displayed to prompt you to update the local address book if the versions of the FTP network and local address books are different. When you confirm the update, site information in the FTP network address book is downloaded to the local address book.

    The default value is Enable.

    Clear local records during update

    Specifies whether your endpoint automatically clears the local address book when the local address book is updated.

    The default value is Disable.

    Server address

    Specifies the IP address of the server that stores the FTP network address book.

    No default value is set for this parameter.

    File path

    Specifies the save path of the FTP network address book on the server.

    No default value is set for this parameter.

    User name

    Password

    Specify the user name and password your endpoint uses to access the FTP network address book.

    No default value is set for this parameter.

    LDAP Address Book

    Server address

    Specifies the IP address of the LDAP server or corporate directory server.

    No default value is set for this parameter.

    Port

    Specifies the port for connecting to the LDAP server or corporate directory server.

    The default value is 389.

    The value can be 389 or an integer ranging from 1025 to 65534 (excluding 4999, 5000, 5001, and 13333).

    Base DN

    Specifies the distinguished name (DN) of the entry at which a specified search starts.

    No default value is set for this parameter.

    Example: dc=zdtest,dc=com

    Authentication type

    Specifies the LDAP server or corporate directory server authentication mode.

    • General: Use the user name and password for authentication.
    • Secured: Perform authentication, including authentication on digital certificates, based on the Secure Sockets Layer (SSL) protocol.

    The default value is General.

    SSL encryption

    Specifies whether the SSL protocol is used to encrypt data streams sent to and received from the LDAP server or corporate directory server.

    The default value is Enable.

    User name

    Password

    Specifies the user name and password used for LDAP server or corporate directory server authentication.

    The default value of User name is admin.

    The value can consist of digits, letters, and special characters, such as @ # %.

    Synchronize automatically

    Specifies whether your endpoint regularly updates the LDAP Address Book entries in the local address book.

    NOTE:

    If you set this parameter to Enable, you must also set Automatic update interval and Local records prevail if duplicates exist.

    The default value is Enable.

    Automatic update interval

    Specifies the interval for updating the LDAP Address Book entries in the local address book.

    The default value is 24 h.

    Local records prevail if duplicates exist

    Specifies whether records that already exist in the local address book remain unchanged during an address update from the address book on the LDAP server or corporate directory server.

    The default value is Disable.

    Search LDAP

    If this function is enabled, the system will automatically search for sites based on the specified Search keyword after entering the Address Book page.
    NOTE:

    You need to set Search keyword if the Search LDAP function is enabled.

    The default value is Disable.

    Search keyword

    Specifies the keyword that the system uses to search for sites after entering the Address Book page.

    No default value is set for this parameter.

  3. Click Save.
Translation
Download
Updated: 2019-10-22

Document ID: EDOC1100044672

Views: 14135

Downloads: 16

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next