No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web Online Help

TE10 Videoconferencing Endpoint V600R019C00

This document describes the help information on the web interface.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Web Browser

Web Browser

Before using the endpoint web interface for remote management, configure the web browser on your computer.


The endpoint web interface supports the following web browsers:
  • Internet Explorer 11
  • Firefox 39–54
  • Chrome 41–59
  • Safari 10.1
  • Microsoft Edge 40
Microsoft Internet Explorer is recommended. If you use other browsers or versions, the web interface may appear slightly different. The web interface will still work as expected.
  • Before you begin, ensure that the latest patches for the operating system and browser are installed.
  • It is recommended that you use Microsoft Internet Explorer 11 or later. Microsoft has stopped maintaining versions earlier than Internet Explorer 11 or releasing patches for them. Using any of the earlier versions may pose security risks.


The following description uses Window 7 as an example to describe how to configure Microsoft Internet Explorer 11, Mozilla Firefox 44.0.2, and Google Chrome 46.0.2490.80 m. The methods for configuring other browser versions are similar.

  1. Start Internet Explorer.
  2. From the Internet Explorer menu bar, choose Tools > Internet Options. In the Internet Options dialog box that is displayed, click the Security tab.
  3. In the bottom of the tab, click Custom level.
  4. In the Security Settings dialog box that is displayed, perform the operations as follows:
    1. Set all options under Downloads and Scripting to Enable.
    2. Select Display mixed content under Miscellaneous.
  5. Click OK.
  6. On the Security tab, click Trusted site and then Site.

    The Trusted site dialog box is displayed.

  7. In the Add this website to the zone text box, enter the IP address of your endpoint. Then click Add.
  8. Click Close.
  9. Click the Privacy tab. Move the slider to display the Medium level.
  10. Click the Advanced tab. Select Use TLS 1.1 or Use TLS 1.2 in the Settings area.
  11. Click OK.

    The configuration is complete.

To ensure that information can be properly displayed, if you choose to skip 6 through 8, choose Tools > Pop-up Blocker > Turn Off Pop-up Blocker from the menu bar of Internet Explorer.

If you use Mozilla Firefox or Google Chrome, set it as follows:

  • Click in the right corner of the Firefox menu bar to open the settings window. Click Privacy, select Accept cookies from sites, and click OK.
  • Use the default settings for Google Chrome.
Updated: 2019-12-02

Document ID: EDOC1100044672

Views: 16360

Downloads: 20

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next