No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web Online Help

TE10 Videoconferencing Endpoint V600R019C00

This document describes the help information on the web interface.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Basic Parameters

Setting Basic Parameters

Basic parameters include the time, time zone, power management, user, and ringtone.

Procedure

  1. Choose System Settings > General.
  2. Set the basic parameters listed in Table 3-1.

    Table 3-1  Basic parameters

    Parameter

    Description

    Setting

    Time and Time Zone

    Location

    Specifies the country or area where your endpoint is located.

    When you set this parameter, your endpoint automatically adjusts the value of the Time zone parameter.

    The default value is China.

    Time zone

    Specifies the time difference between the local time and the Greenwich Mean Time (GMT).

    The default value is (UTC+08:00) Beijing, Chongqing, Hong Kong, Urumqi.

    Your endpoint automatically sets this parameter based on the value set for Location.

    Time format

    Specifies the format in which time is displayed.

    The default value is 24-hour.

    Date format

    Specifies the format in which the date is displayed.

    The default value is YYYY/MM/DD.

    Enable NTP

    Specifies whether to automatically synchronize system time with a Network Time Protocol (NTP) server at an interval of 300 seconds.

    NOTE:

    If you set this parameter to Enable NTP, you must also set NTP server address.

    The default value is Disable.

    NTP address type

    Specifies the mode for your endpoint to obtain the NTP server IP address.

    • Auto: Your endpoint automatically obtains the NTP server IP address.
    • Manual: You must manually set the NTP server IP address.

    This parameter is available only when Connection type is set to Dynamic IP.

    NOTE:
    For details about how to set Connection type, see Setting LAN Parameters.

    The default value is Manual.

    NTP server address

    Specifies the NTP server IP address or domain name.

    No default value is set for this parameter.

    Set this parameter to the IP address or domain name of the actually deployed NTP server.

    System time

    Specifies the time set on the system.

    Set the system time to your local time to ensure appropriate use of system functions, such as joining conferences on time and recording accurate event occurrence time in logs.

    Power management

    Restart

    Specifies whether to display the Restart option after you press the Power button on the remote control.

    The default value is Enable.

    Enter Sleep Mode

    Specifies the period after which the endpoint enters sleep mode if you do not perform any operations.

    If you set this parameter to Never, the endpoint will never automatically enter sleep mode.

    The default value is After 10 min.

    Scheduled restart

    After this function is enabled, the endpoint automatically checks whether a conference, upgrade, diagnosis, or inspection is in progress when the scheduled restart time (specified by the Scheduled restart time field) arrives. If no, it automatically restarts. If yes, it will perform a check again 10 minutes later. If the endpoint is still in one of the preceding activities after three checks, it will neither check nor restart. A check will be performed again only when the next scheduled restart time arrives.

    The default value is Disable.

    Scheduled restart time

    Specifies the time when the endpoint will restart.

    The value format depends on the value set for Time format.

    The default value is 4:0, which corresponds to the 24-hour value for Time format.

    Personal

    Administrator name

    Current password

    New password

    Confirm password

    Specify the administrator's user name and password.

    The user name can contain a maximum of 64 characters, and the password can contain 8 to 32 characters.

    The password must include at least three of the following: uppercase letters, lowercase letters, digits, and special characters.

    Change the initial password at the first use, and periodically change the password afterwards.

    Name of API user

    Password of API user

    Confirm password

    Account used to log in to the endpoint's web interface or used by a third party such as the VTS to connect to the endpoint.

    The user name can contain a maximum of 64 characters, and the password can contain 8 to 32 characters.

    The password must include at least three of the following: uppercase letters, lowercase letters, digits, and special characters.

    Ringtone

    Ringtone

    Specifies the ringtone for incoming calls.

    The default value is Default.

    Wi-Fi and Bluetooth

    Wi-Fi

    Specifies whether the endpoint enables the Wi-Fi function. After this function is enabled, Wi-Fi client and Wi-Fi hotspot parameters under System Settings > Network > Wi-Fi Settings can be set.

    The default value is Enable.

    Bluetooth

    Specifies whether the endpoint enables the Bluetooth function. After this function is enabled, Bluetooth parameters under System Settings > Network > Bluetooth can be set.

    The default value is Enable.

  3. Click Save.

    The settings take effect immediately.

Translation
Download
Updated: 2019-10-22

Document ID: EDOC1100044672

Views: 14020

Downloads: 16

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next