No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web Online Help

TE10 Videoconferencing Endpoint V600R019C00

This document describes the help information on the web interface.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Audio and Video Protocols

Setting Audio and Video Protocols

Your endpoint supports multiple audio and video protocols. Select the protocols required for call purposes.


Using the audio or video protocol that you select, your endpoint negotiates the audio or video capability with a remote endpoint to set up a call.

If you do not select any audio or video protocols on the Audio and Video Protocols tab, you cannot set audio or video protocols while you are Setting Advanced Conference Parameters.


  1. Choose System Settings > Conference and click the Audio and Video Protocols tab.
  2. Select audio and video protocols.

    Select at least one audio protocol and one video protocol so that you can use your endpoint to place audio calls or video calls.

  3. Click Save.

    The settings take effect immediately.

Updated: 2019-12-02

Document ID: EDOC1100044672

Views: 14837

Downloads: 17

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next