No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web Online Help

TE10 Videoconferencing Endpoint V600R019C00

This document describes the help information on the web interface.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Audio

Configuring Audio

After connecting audio cables, set the audio parameters.


  1. Choose System Settings > Input/Output and click the Audio tab.
  2. Set the audio parameters listed in Table 3-7.

    Table 3-7  Audio parameters




    LINE OUT mode

    Specifies the LINE OUT mode.

    The default value is Video output port.

    Second dial tone

    Enables or disables tone prompts for secondary dials.

    The default value is Disable.

    Speaker Force Output

    Specifies whether to enable forcible output for the built-in speaker.


    Set this parameter only when the HDMI OUT port or the built-in speaker is used for audio output.

    The default value is Disable.

    Echo delay

    Adjusts the echo delay to eliminate echos caused by delay in audio output during conferences.

    The default value is 0.

    Value range: 0-9

  3. Click Save.

    The settings take effect immediately.

Updated: 2019-10-22

Document ID: EDOC1100044672

Views: 14101

Downloads: 16

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next