No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web Online Help

TE10 Videoconferencing Endpoint V600R019C00

This document describes the help information on the web interface.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling a Conference

Controlling a Conference

After initiating a multipoint conference, you can control the video and audio of sites using conference control functions.

Table 4-4 lists common icons displayed on the conference control page.

Table 4-4  Icons on the conference control page

Icon

Description

Your site is chairing the conference.

The microphones of the site have been muted, and the other sites in the conference cannot hear the site. This icon indicates that the site itself, not the chair site, mutes the site's microphones.

The microphones of the site have been muted, and the other sites in the conference cannot hear the site.

The site is being broadcast.

The site is being viewed.

The site is not in the conference.

The site is in the conference.

The site is sharing a presentation.

The site is a PSTN, or SIP audio site.

Table 4-5 lists the icons used to adjust the site display mode on the conference control page.

Table 4-5  Icons used to adjust the site display mode

Icon

Description

Refreshes the conference control page.

Displays sites in a list.

Displays sites as icons.

NOTE:

To perform a conference control operation on the conference control page, click the button for the desired operation and select an operation object.

For example, to broadcast a site, click Broadcast site and select the site you want to broadcast.

Any site can view another site and chair control rights. A conference can have only one chair site at a time. Other sites can become the chair site only after the current chair site releases chair control rights or the chair control rights are revoked.

NOTE:

Not all the conference control functions listed in Table 4-6 are available on the conference control page during a conference, depending on your role in the conference and your settings for the conference control page.

Table 4-6  Conference control functions

Conference Control Function

Description

Conference control operations available for a non-chair site

Request Chair

The conference chair site can use more conference control functions than other sites.

Only non-chair sites can request chair control rights when no chair site exists in a conference. Audio-only sites cannot request chair control rights.

The conference access number is required when a site requests chair control rights. Obtain this number from the calling party or the SMC administrator.

View Site

Non-chair sites are only allowed to view other sites under the same MCU. Only one site can be viewed at a time.
NOTE:
During multipoint conferences hosted by standalone MCUs, the endpoint supports multiple continuous presence views.

Conference control operations available for the chair site

Broadcast Site

The chair site can broadcast any non-audio-only sites, including the chair site itself. When a site is broadcast, all non-chair sites are forced to view the broadcast site, while the chair site can view any sites present in the conference.

To stop broadcasting a site, click Stop Broadcasting.

When the chair site stops broadcasting a site, all the sites can view any other sites.

View Site

Chair sites are only allowed to view other sites under the same MCU. Only one site can be viewed at a time.

NOTE:
During multipoint conferences hosted by standalone MCUs, the endpoint supports multiple continuous presence views.

Call Site

You can place a call to a site that is not in the conference. The site joins the conference after answering the call.

Hang Up

The chair site can disconnect a site from the conference without removing the site from the site list. To have the site join the conference again, the chair site can perform the Call Site operation.

Add Site

You can add sites to an ongoing conference, regardless of whether those sites have been defined in the address book. The MCU hosting the conference then places calls to the added sites.

Delete Site The chair site can disconnect a site from the conference and remove the site from the site list. To enable the site to join the conference again, the chair site must add the site to the conference by performing the Add Site operation.

End Conference

If a conference is completed before the scheduled time, the chair site can use the End Conference function to end the conference in advance.

Mute/Unmute MIC

  • Mutes the microphones of a site so that other sites in the conference cannot hear the site.
  • To enable the site to be heard by other sites, unmute the site's microphones.

Extend Conference

If a conference is not likely to be complete by the scheduled time, the chair site can extend the conference using the Extend Conference function.

Before extending a conference, you must ensure that the videoconferencing resources and your account balance are sufficient to cover an extension. To increase the chances of success, extend the conference by 30 minutes at most at a time.

Release Chair

Releases chair control rights. When chair control rights are released, any sites in the conference can request to become the chair site.

Lock conference The Lock conference operation can be performed only from the endpoint whose chair site is being used. After the Lock conference operation is performed, the endpoint whose chair site is being used can call the other endpoints to join the conference, but other endpoints cannot call into the conference. To enable other endpoints to call into the conference, perform the Unlock Conference operation.
NOTE:
Only conferences on the IMS hosted and SP hosted networks can be locked.

Set Continuous Presence

Views multiple sites at the same time.

The continuous presence function is used to display the video from two or more sites on the same display at the same time. The number of the sites to be displayed and the layout of the site videos vary according to continuous presence modes.

This function is available only when continuous presence resources have been reserved for the conference.

Voice activation

This function is used in discussions. Video of the participant who is speaking the loudest is displayed to all the other participants. You can set the threshold that triggers voice activation based on your needs. After voice activation is enabled:
  • If one or more participants speak at the volume higher than the threshold, video of the participant who is speaking the loudest will be broadcast to all the other participants.
  • If no participant speaks at the volume higher than the threshold, no video will be broadcast. In this case, you can click Stop to disable voice activation.

Monitor Video

From the conference control page for the chair site or the site where the built-in MCU is used, you can view the video and presentation of a remote site. You can also adjust the sizes of the video or the presentation. In this way, you can monitor the status and video quality of the remote site.

NOTE:
This function involves personal privacy. Ensure that its use complies with local laws and regulations.

Recording

From the conference control page, click Start to start recording and Stop to stop recording.

Only the chair site can perform this conference control operation.

NOTE:
To record a conference, ensure that:
  • The recording server address has been configured on the endpoint. For details, see Setting General Conference Parameters.
  • Support recording is selected when you schedule or start the conference. For details, see Initiating a Conference from the Predefined Conference Page.
  • Only conferences in the on-premises and IMS hosted networking schemes can be locked.

  • To ensure rights of participants, read the instructions and suggestions for using recording products in the latest HUAWEI RSE6500 Security Maintenance before using the products.

Translation
Download
Updated: 2019-10-22

Document ID: EDOC1100044672

Views: 13883

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next