No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage V100R006C30 Block Storage Service Disaster Recovery Feature Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying a Consistency Group

Modifying a Consistency Group


This operation enables you to modify the name, restoration policy, and synchronization speed of a remote replication consistency group.


  • You have created a consistency group whose running status is not Invalid.


    1. In FusionStorage Block Self-Maintenance Platform, choose DR Service > dr. On the DR Cluster page, at the row where the cluster resides, click Manage Remote Replication, and select Consistency Group Management.

      The Consistency Group Management page is displayed.

    2. In the operation column of the consistency group to be modified, choose More > Modify.

      The Modify dialog box is displayed.

    3. Modify parameters of the consistency group.

      Table 3-7 lists related configuration parameters.

      Table 3-7  Consistency group parameters



      Value (Example)


      • The name contains 1 to 63 characters.
      • The name contains only letters, digits, hyphens (-), and underscores (_).


      Restoration Policy

      A restoration policy determines whether the system automatically synchronizes data after the fault is rectified.
      • Automatic: The system automatically synchronizes data.
      • Manual: Data synchronization must be performed manually.


      Synchronization Speed

      Data copy rate in KB/s. Value range: [1024,1048576]. System default value: 32768.


      Synchronization Type

      • Manual: You need to manually start data synchronization.
      • Timed wait when synchronization starts: Period from the time a synchronization starts to the time the next synchronization starts. If this period is shorter than the synchronization time, complete the current synchronization before starting the next one.
      • Timed wait when synchronization ends: Period from the time a synchronization ends to the time the next synchronization starts.
      • Specify the time policy: Synchronization starts at a defined time point.
        • Daily: Synchronization starts at a defined time point every day.
        • Hourly: Synchronization starts at a defined time point every hour.


    4. Click Modify.
    5. Split the remote replication pair as prompted.
Updated: 2019-01-17

Document ID: EDOC1100044928

Views: 17699

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next