No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C30 Block Storage Service Disaster Recovery Feature Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Performing a Primary/Secondary Switchover for a Remote Replication Pair

Performing a Primary/Secondary Switchover for a Remote Replication Pair

Scenario

This operation enables you to perform a primary/secondary switchover for a remote replication pair. After the switchover, the primary and secondary ends are switched over.

Prerequisites

  • You have created a remote replication pair and its running status must be Split.
  • You have created a consistency snapshot for the secondary volume.
  • You have disabled protection for secondary resource.

Procedure

    1. In FusionStorage Block Self-Maintenance Platform, choose DR Service > dr > DR Cluster. On the Disaster Recovery Service page, at the row where the cluster resides, click Manage Remote Replication, and select Remote Replication Pair Management.

      The Remote Replication Pair Management page is displayed.

    2. In the operation column of the remote replication pair whose status is to be switched, click More > Perform Primary/Secondary Switchover.

      During the primary/secondary switchover, ensure that data has been synchronized between the primary and secondary ends. Otherwise, data that is not synchronized will be lost.

    3. Split the remote replication pair as prompted.
    4. Optional: Enable Protection for Secondary Resource.
Translation
Download
Updated: 2019-01-17

Document ID: EDOC1100044928

Views: 17625

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next