No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C30 Block Storage Service Disaster Recovery Feature Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Associating a Consistency Group

Associating a Consistency Group

Scenario

This operation enables you to add a remote replication pair to a consistency group.

Prerequisites

  • You have created a remote replication pair whose status is Split.
  • You have created a consistency group whose status is Split.
  • You have not associated the remote replication pair with a consistency group.
  • You have enabled protection for secondary resource for both the remote replication pair and consistency group.
  • The remote replication pair must belong to the same remote device as the consistency group, and the data synchronization directions must be the same.

Procedure

    1. In FusionStorage Block Self-Maintenance Platform, choose DR Service > dr > DR Cluster. On the Disaster Recovery Service page, at the row where the cluster resides, click Manage Remote Replication, and select Remote Replication Pair Management.

      The Remote Replication Pair Management page is displayed.

    2. In the operation column of the remote replication pair which needs to associate with the consistency group, choose More > Add to Consistency Group.
    3. On the Add to Consistency Group page, select the consistency group to be associated and click OK.
    4. Confirm that the synchronization type needs to be changed. Click OK.
    5. Split the remote replication pair as prompted.
Translation
Download
Updated: 2019-01-17

Document ID: EDOC1100044928

Views: 17322

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next