No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C30 Block Storage Service Disaster Recovery Feature Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a HyperMetro Domain

Creating a HyperMetro Domain

Scenarios

After a remote device and a quorum server are created, create a HyperMetro domain for the remote device, local device, and the quorum server. During the HyperMetro creation, relationships among local devices, remote devices, and quorum servers can be determined by HyperMetro domains.

You can create only one quorum server for a HyperMetro domain. Perform this operation only for the local FusionStorage Block system.

Prerequisites

  • You have logged in to FusionStorage Block Self-Maintenance Platform.
  • At least one remote device has been created in the system.
  • If the quorum server needs to be configured for the HyperMetro domain, ensure that both the local and remote devices have added the quorum server.
    NOTE:

    Log in to the quorum server. In the CLI of the quorum server, switch to a directory, run the qsadmin command to open the quorum server software, and run the show server_ip command to check the statuses of the local and remote devices. If both status values are Established, the quorum server is successfully added.

Procedure

    Create a HyperMetro domain.

    1. On FusionStorage Block Self-Maintenance Platform, choose DR Service > dr > DR Cluster, click Manage HyperMetro in the row where the cluster resides.
    2. Choose HyperMetro Domain Management, and click Create.
    3. Set parameters for the HyperMetro domain.

      Table 2-18 lists the configuration parameters.

      Table 2-18  HyperMetro domain configuration parameters

      Name

      Description

      Example Value

      Basic Information

      Name

      It must be a string of 1 to 31 characters starting with a letter or digit and can contain uppercase letters, lowercase letters,digits, underscores (_),and hyphens (-).

      HypeDomain01

      Type

      Select the type of the HyperMetro domain.

      The current version supports HC_DOMAIN_TYPE_AA only.

      HC_DOMAIN_TYPE_AA

      DR Cluster

      Name

      Select the DR cluster name of the HyperMetro domain.

      cluster1

      Remote Device ID

      Select the remote device ID of the HyperMetro domain.

      0

    4. Click Create.

      The confirmation dialog box is displayed.

    5. Click OK.

      The HyperMetro domain creation is complete.

Translation
Download
Updated: 2019-01-17

Document ID: EDOC1100044928

Views: 17476

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next