Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Inspecting Cable Layout
Visually inspect the cable layout. Obtain the customer's permission before removing or inserting cables.
To prevent any damage to the cables, take the following precautions before inspecting the cable layout:
- Check that power cables meet the following requirements:
- The connector surface of each three-wire power ground cable is in a good condition.
- All power cable types are correct.
- The insulation layer of each power cable is in a good condition.
- Keep cables slack and away from heat sources.
- Do not use excessive force to install or remove a cable.
- Install or remove a cable by holding its connectors.
- Do not twist or tear cables.
- Lay out and connect cables properly, and ensure that they are not in contact with any components that are removable or replaceable.
For details, see Huawei Server Inspection Report.