No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Basic Storage Service Configuration Guide for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the basic storage services and explains how to configure and manage them.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing an Object

Removing an Object

This operation enables you to remove a LUN or snapshot from a LUN group.


  1. Choose Provisioning > LUN > LUN Group.
  2. Select the LUN group you want to modify and click Remove Object.

    The Remove Object dialog box is displayed.

  3. Select the LUN or snapshot you want to remove from the LUN group.
  4. Click to add the selected LUN or snapshot to Selected LUNs or Selected Snapshots.
  5. Confirm the operation.

    1. Click OK.

      A security alert dialog box is displayed.

    2. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
    3. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation is successful.

    4. Click Close.

Updated: 2019-07-17

Document ID: EDOC1100049139

Views: 35876

Downloads: 244

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next