No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing LUN Group Information

Viewing LUN Group Information

This operation enables you to view basic information about all LUN groups.

Prerequisites

At least one LUN group has been created.

Procedure

  1. Choose Provisioning > LUN > LUN Group.
  2. View the LUN group information.

    Table 5-17 describes the related parameters.
    Table 5-17 LUN group parameters

    Parameter

    Description

    Setting

    Name

    Name of a LUN group.

    [Example]

    LUNGroup001

    ID

    ID of a LUN group.

    [Example]

    1

    Capacity

    Total capacity of LUNs and snapshots in a LUN group.

    [Example]

    2.000 GB

  3. Select a LUN group to view information about the LUNs and snapshots in the LUN group in the lower pane.

Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100049139

Views: 30681

Downloads: 225

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next