No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Basic Storage Service Configuration Guide for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Creating a Port Group

(Optional) Creating a Port Group

A port group is a logical grouping of multiple physical ports. The storage system specifies ports to set up mappings between storage resources (LUNs) and servers. This operation enables you to create a port group and add it to a mapping view. After that, LUNs of a specified LUN group use the ports in the port group to communicate with the corresponding hosts in the host group. If no port group is added to a mapping view, available ports are selected at random.


Do not add a member in a bond port to a port group.


  1. Choose Provisioning > Port > Port Groups.
  2. Click Create.

    The Create Port Group dialog box is displayed.

  3. Set parameters of the port group.

    Table 4-22 describes the related parameters.
    Table 4-22 Port group parameters





    Name of a port group.

    • The name must be unique.
    • The name can contain only letters, digits, periods (.), underscores (_), and hyphens (-).
    • The name must contain 1 to 31 characters.




    Description of a port group.



  4. Select the ports you want to add to the port group in Available Ports and Click to add them to Selected Ports.


    One port can be added to multiple port groups.

  5. Confirm your operation.

    1. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation is successful.

    2. Click Close.

Updated: 2019-07-17

Document ID: EDOC1100049139

Views: 28020

Downloads: 212

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next