No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding an Object

Adding an Object

This operation enables you to add a LUN or snapshot to a LUN group to expand storage space.

Procedure

  1. Choose Provisioning > LUN > LUN Group.
  2. Select the LUN group you want to modify and click Add Object.

    The Add Object dialog box is displayed.

  3. Select the LUN or snapshot you want to add to the LUN group.

    NOTE:

    To facilitate LUN locating, select Show only the LUNs that do not belong to any LUN group in the lower left corner of the dialog box.

  4. Click to add the selected LUN or snapshot to Selected LUNs or Selected Snapshots.
  5. Confirm your operation.

    1. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation is successful.

    2. Click Close.

Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100049139

Views: 27498

Downloads: 209

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next