No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Basic Storage Service Configuration Guide for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the basic storage services and explains how to configure and manage them.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding a Host

Adding a Host

This operation enables you to add a host to a host group.


  1. Choose Provisioning > Host > Host Group.
  2. Select the host group that you want to add a host to.
  3. Click Add Host to add a host.

    The Add Host to Host Group dialog box is displayed.

  4. Select the host that you want to add.

    If hosts to be added into the host group belong to different clusters, data access conflicts may occur, resulting in data loss. Before performing this operation, you are advised to install cluster software to manage hosts.


    By default, Shows only the hosts that do not belong to any host group at the bottom left corner of the dialog box is selected to facilitate host locating.

  5. Click to add the host to the Selected Hosts area.
  6. Confirm your operation.

    1. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation is successful.

    2. Click Close.

Updated: 2019-07-17

Document ID: EDOC1100049139

Views: 35780

Downloads: 243

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next