No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Fibre Channel Port Information

Viewing Fibre Channel Port Information

The following procedure guides you through how to view the information about Fibre Channel ports on a storage device.

Procedure

  1. Choose System.
  2. Click the controller enclosure where the Fibre Channel port resides.
  3. Click to switch to the rear view.
  4. Click the Fibre Channel port whose information you want to view.

    The FC Port dialog box is displayed.

  5. View the Fibre Channel port information.

    Table 5-1 describes Fibre Channel port parameters.
    Table 5-1 Fibre Channel port parameters

    Parameter

    Description

    Value

    Name

    Name of the Fibre Channel port.

    [Example]

    P0

    Location

    Location of the Fibre Channel port.

    [Example]

    XXX0.A1.P0 or XXX0.B.IOM1.P0

    NOTE:

    The displayed information is consistent with actual product specifications.

    Health Status

    Health status of the Fibre Channel port.

    [Example]

    Normal

    Running Status

    Running status of the Fibre Channel port.

    [Example]

    Link up

    WWPN

    WWPN of the Fibre Channel port.

    [Example]

    20181051720c8a61

    Configured Rate (Gbit/s)

    Configured rate of the Fibre Channel port.

    [Example]

    Autonegotiation

    Working Rate (Gbit/s)

    Data transfer rate of the Fibre Channel port.

    [Example]

    8

    Max. Working Rate (Gbit/s)

    Maximum data transfer rate of the Fibre Channel port.

    [Example]

    8

    Operating Mode

    Operating mode of the Fibre Channel port.

    [Example]

    FC-AL

    Port Switch

    Switch of the Fibre Channel port. Possible values are Enable and Disable. A port will be disconnected if the port switch is set to Disable.

    [Example]

    Enable

    Initiator

    Number of initiators connected to the Fibre Channel port.

    [Example]

    1

    ID

    ID of the Fibre Channel port.

    [Example]

    2039810

Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100049139

Views: 30666

Downloads: 225

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next