No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the basic storage services and explains how to configure and manage them.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Ethernet Port Information

Viewing Ethernet Port Information

The following procedure guides you through how to view the information about Ethernet ports on a storage device.

Prerequisites

An Ethernet interface module has been properly installed on a controller.

Procedure

  1. Choose System.
  2. Click the controller enclosure where the Ethernet port resides.
  3. Click to switch to the rear view.
  4. Click the Ethernet port whose information you want to view.

    The Ethernet Port dialog box is displayed.

  5. View the Ethernet port information.

    Table 5-3 describes Ethernet port parameters.

    Table 5-3 Ethernet port parameters

    Parameter

    Description

    Value

    Name

    Name of the Ethernet port.

    [Example]

    H0

    Location

    Location of the Ethernet port.

    [Example]

    XXX0.A1.P0 or XXX0.A.IOM0.P1

    NOTE:

    The displayed information is consistent with actual product specifications.

    Health Status

    Health status of the Ethernet port.

    [Example]

    Normal

    Running Status

    Running status of the Ethernet port.

    [Example]

    Link Down

    Working Rate (Gbit/s)

    Data transfer rate of the Ethernet port.

    [Example]

    1

    Max. Working Rate (Gbit/s)

    Maximum data transfer rate of the Ethernet port.

    [Example]

    1

    Work Mode

    Work mode of the Ethernet port.

    [Example]

    10GE NOFEC

    IPv4 Address

    IPv4 address of the Ethernet port.

    [Example]

    192.168.1.100

    Subnet Mask

    Subnet mask of the Ethernet port's IPv4 address.

    [Example]

    255.255.0.0

    IPv6 Address

    IPv6 address of the Ethernet port.

    [Example]

    21DA:D3:0:2F3B:2BB:FF:FE28:9C5B

    Prefix

    Prefix length of the Ethernet port's IPv6 address.

    [Example]

    64

    MAC Address

    MAC address of the Ethernet port.

    [Example]

    90:17:ac:ba:86:b1

    Logical Type

    Logical type of the Ethernet port.

    [Example]

    Front-end port

    Port Switch

    Switch of the Ethernet port. Port connection will be disconnected if the port switch is set to Disable.

    [Example]

    Enable

    MTU (Byte)

    Maximum size of a data packet that can be transferred between the Ethernet port and the application server.

    [Example]

    2500

    Bond Name

    Name of the bonded Ethernet port.

    [Example]

    bond01

    iSCSI Target Name

    Target name of the network where the Ethernet port resides.

    [Example]

    iqn.2006-08.com.xxx:xxx:53000022a10b58b4::20100:192.168.100.11

    Initiator

    Number of initiators connected to an Ethernet port.

    [Example]

    1

    ID

    ID of the Ethernet port.

    [Example]

    2039810

Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100049139

Views: 35260

Downloads: 236

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next