No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Basic Storage Service Configuration Guide for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a LUN Consistency Group

Creating a LUN Consistency Group

This operation enables you to add LUNs with consistency applications to a LUN consistency group. In this way, you can more efficiently operate the LUNs in a unified manner.


Only common LUNs can be added to LUN consistency groups. eDevLUNs, VVol LUNs, PE LUNs, snapshots, and clones cannot be added to LUN consistency groups.


  1. Choose Provisioning > LUN > LUN Consistency Group.
  2. Click Create.

    The Create LUN Consistency Group dialog box is displayed.

  3. Set basic properties for the LUN consistency group.

    Table 5-11 describes the related parameters.
    Table 5-11 LUN consistency group parameters





    Name of a LUN consistency group.

    [Value range]

    • The name must be unique.
    • The name can contain only letters, digits, periods (.), underscores (_), and hyphens (-).
    • The name must contain 1 to 31 characters.




    Description of a LUN consistency group.



  4. Select the LUNs you want to add to the LUN consistency group.

    1. In the Available LUNs area, select one or more LUNs based on your service need.
    2. Click to add the LUNs to the Selected LUNs area.

  5. Confirm the creation of the LUN consistency group.

    1. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation is successful.

    2. Click Close.

Updated: 2019-07-17

Document ID: EDOC1100049139

Views: 30983

Downloads: 226

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next