No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

This document is applicable to the following product models.

Product Series

Product Model

OceanStor Dorado V3 series

Dorado3000 V3a

Dorado5000 V3

Dorado6000 V3

Dorado18000 V3

a: supported in V300R002C10 and later versions

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Content Conventions

The purchased products, services, and features are stipulated by the commercial contract made between Huawei and the customer. All or partial products, services and features described in this document may not be within the purchased scope or the usage scope. Unless otherwise agreed by the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees, or representations of any kind, either express or implied

As part of an effort to improve and enhance the performance and capabilities of its product line, Huawei Technologies Co., Ltd. from time to time releases revisions of its hardware and software. Therefore, some functions described in this manual may not be supported by all revisions of the software or hardware currently in use. For the most up-to-date information on product features, refer to your product release notes.

If a product does not function as described in this manual, please contact your Huawei Technologies Co., Ltd. technical support.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 03 (2019-03-30)

This is the third official release.

Modified commands:

  • create consistency_group synchronization
  • change consistency_group general
  • show remote_support general
  • export running_data
  • change remote_replication general
  • change remote_device user_password
  • show dns_server general
  • change cli
  • show devicemanager dos_whitelist
  • create consistency_group asynchronization
  • create remote_replication general
  • create remote_replication unified
  • create lun_takeover general
  • test ldap configuration
  • change disk_domain general
  • create dr_star general
  • show lun general
  • import certificate
  • show certificate general
  • change certificate prewarning_time
  • export certificate
  • change certificate password
  • delete crl general
  • import crl file
  • show crl general
  • create lun
  • create hyper_copy local
  • delete hyper_copy
  • delete snapshot_consistency_group
  • change snapshot_consistency_group cancel_restore
  • change snapshot_consistency_group reactivate
  • create snapshot_consistency_group general
  • create snapshot_consistency_group duplicate
  • change snapshot_consistency_group restore
  • change nas_inter_connected_port
  • show nas_inter_connected_port

Issue 02 (2019-02-11)

This is the second official release.

Added commands:

  • delete certificate general

Modified commands:

  • show role system
  • change certificate password
  • delete crl general
  • show crl general
  • change lun_migration
  • show enclosure
  • show expansion_module
  • export certificate
  • import certificate
  • import crl file
  • change system management_ip
  • show certificate general
  • change certificate prewarning_time
  • delete snapshot_consistency_group
  • create disk_domain
  • create snapshot_consistency_group general
  • change lun
  • create hyper_copy local
  • delete hyper_copy
  • create hyper_copy_consistency_group
  • change snapshot_consistency_group cancel_restore
  • change snapshot_consistency_group restore
  • show lun_takeover general
  • change hyper_copy restore
  • change hyper_copy synchronize
  • change hyper_copy_consistency_group restore
  • change hyper_copy_consistency_group synchronize
  • show hyper_copy_consistency_group general
  • show hyper_copy general
  • show hyper_copy_consistency_group hyper_copy
  • change hyper_copy_consistency_group general
  • change hyper_copy general
  • delete hyper_copy_consistency_group
  • remove hyper_copy_consistency_group hyper_copy
  • add hyper_copy_consistency_group hyper_copy
  • change snapshot_consistency_group reactivate
  • show lun_consistency_group snapshot_consistency_group
  • show port general
  • create snapshot_consistency_group duplicate
  • show snapshot_consistency_group general
  • change snapshot_consistency_group general
  • show interface_module
  • show lun general
  • create dr_star general
  • create lun
  • show disk general

Issue 01 (2018-10-30)

This is the first official release.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100049140

Views: 94767

Downloads: 110

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next