No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add mapping_view port_group

add mapping_view port_group

Function

The add mapping_view port_group command is used to add a port group to a mapping view.

Format

add mapping_view port_group mapping_view_id=? port_group_id=?

Parameters

Parameter

Description

Value

mapping_view_id=?

Mapping view ID.

To obtain the value, run "show mapping_view general".

port_group_id=?

Port group ID.

To obtain the value, run "show port_group general".

Level

Administrator

Usage Guidelines

None.

Example

Add port group "0" to mapping view "1".

admin:/>add mapping_view port_group mapping_view_id=1 port_group_id=0 
WARNING: You are about to modify mappings among LUN groups, host groups, and port groups in the mapping view. 
This operation will make the original mappings become invalid. 
Suggestion: Before performing this operation, ensure that the selected mapping view, LUN groups, host groups, and port groups are correct, and stop host services related to the mapping view. 
Have you read warning message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Add port group 0 successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115085

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next